Honda Fit/Jazz - Sunroof Drain Channel Slider and Cable Assembly Replacement
Sunroof Drain Channel Slider and Cable Assembly Replacement
3. | Put on gloves to protect your hands. Remove the screws (A, B), then remove the slide stops (C) and cable tube rear brackets (D). Remove the bolts(E) from the cable tube side bracket (F) and the cable tube mounting screws (G) from both sides of the frame (H).
|
4. | If equipped, detach the onen switch connector clip (I) from the frame.
|
5. | Pivot the glass bracket (A) down by sliding the link lifter (B) back, then slide both glass brackets back with the link lifter.
|
6. | Slide the cable assembly (A) and both glass brackets (B) back, then remove them from the frame (C).
|
7. | Remove the drain channel slider (A) from the glass bracket (B).
|
check the opening drag.
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals