Honda Fit/Jazz - Rear Door Latch Replacement
Rear Door Latch Replacement
NOTE: Put on gloves to protect your hands.
Plastic cover, as necessary
Rod protector
3. | Disconnect the lock rod (A) from the lock crank (B).
|
4. | With Super Locking: Remove the bolts, then remove the harness protector (A).
|
5. | Disconnect (and detach) the actuator connector (A). Remove the screws securing the latch (B). Take care not to bend the inner handle rod (C) and lock rod (D).
|
6. | Disconnect the inner handle rod (A) and lock rod (B) from the latch (C).
|
7. | Remove the bolts (A, B) securing the rear lower channel (C), then remove the collar (D).
|
8. | Move the latch (A) through the gap between the rear lower channel (B) and door, then remove it.
|
9. | Install the latch in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly, and each rod is connected securely.
- Make sure the door locks and opens properly.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals