Honda Fit/Jazz - 7-speed Mode Main Switch Test (CVT)
7-speed Mode Main Switch Test
Precautions and Procedures.Remove the steering wheel.
2. | Check the 7SPEED MODE main switch for continuity between cable reel subharness 13P connector terminals No. 8 and No. 9. There should be toggled continuity and no continuity between terminals every time the main switch pushes.
|
3. | 7SPEED MODE main switch test has finished if the test result is OK. If the main switch works incorrectly at the 13P connector, test the switch at the switch connector.
|
4. | Remove the screws (A) (4) securing the steering wheel rear cover (B), then remove the steering wheel rear cover.
|
5. | Remove steering shift + (plus) switch connector from its clamp, then disconnect the connector.
|
6. | Remove the screw (C) securing the steering shift + (plus) switch (D), then remove the switch.
|
7. | Disconnect 7SPEED MODE main switch connector (E), and remove the 7SPEED MODE main switch assembly (F).
|
8. | Check the 7SPEED MODE main switch for continuity between the switch connector terminals No. 5 and No. 6. There should be toggled continuity and no continuity between terminals every time the main switch pushes.
|
Replace the 7SPEED MODE main switch assembly if the main switch works incorrectly.
Replace the cable reel subharness if the main switch is OK.
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals